scope of accreditation - Accredited Laboratories

SCOPE OF ACCREDITATION
CAMBRIDGE MATERIALS TESTING LIMITED
1177 Franklin Blvd.
Cambridge, ON
N1R 7W4
Accredited Laboratory No. 59
(Conforms with requirements of CAN-P-4E (ISO/IEC 17025:2005))
CONTACT:
TEL:
FAX:
EMAIL:
URL:
Ms. Jill Cook
+1 519 621 6600
+1 519 621 6082
jillcook@cambridgematerials.com
www.cambridgematerials.com
CLIENTS SERVED:
Commercial any party
FIELDS OF TESTING:
Chemical/Physical, Mechanical/Physical, Thermal & Fire
Resistance
ISSUED ON:
2015-05-12
VALID TO:
2017-08-08
ELASTOMERS AND PROTECTIVE AND OTHER COATINGS
Adhesives (Organic Resins) and Glues:
Adhesives
ASTM D1002
ASTM D1876
ASTM D3163
ASTM D3164
ASTM D3165
ASTM D3167
ASTM D3330
Test Method for Apparent Shear Strength of
Single-Lap-Joint Adhesively Bonded Metal Specimens by
Tension Loading
Peel Resistance of Adhesives (T-Peel Test)
Test Method for Determining the Strength of Adhesively
Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension
Loading
Strength Properties of Adhesively Bonded Plastic Lap-Shear
Sandwich Joints in Shear by Tension Loading
Strength Properties of Adhesives in Shear by Tension
Loading of Single-Lap-Joint Laminated Assemblies
Test Method for Floating Roller Peel Resistance of
Adhesives
Peel Adhesion of Pressure Sensitive Tape
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 1 of 17
Standards Council of Canada Accredited Laboratory No. 59
ASTM D6862
ASTM D816
ASTM D903
ASTM D904
FLTM BU 112-02
GM 9774P
GM 9838P
SAE J1525
Standard Test Method for 90° Peel Resistance of Adhesives
Test Methods for Rubber Cements
Only for: Method A, B, C
Test Method for Peel or Stripping Strength of Adhesive
Bonds
Exposure of Adhesive Specimens to Artificial Light
Peel Adhesion of Pressure Sensitive Tapes
Only for: Method A, B, D, E
Molding and Emblem Adhesion Test Pluck Resistance
Tape Lamination to Automotive Components
Lap Shear Test for Automotive-Test Adhesives for Fibre
Reinforced Plastic (FRP) Bonding
Paints; Varnishes; Inks; Coatings; and Allied Products:
Application and Working Properties
Refer to minor sub-heading: Paints and Protective Coatings
Applied Coatings Performance
see also
All Forms, Articles of Metal
Fabrics
AMS-QQ-P-416
ASTM A428/A428M
ASTM A90/A90M
ASTM B117
ASTM B136
ASTM B137
ASTM B244
ASTM B368
ASTM B456
Plating, Cadmium (Electrodeposited)
Only for: Adhesion Par. 4.6.2
Hydrogen Embrittlement Relief Test Par. 4.6.4.1
Test Method for Weight of Coating on Aluminum Coated
Iron or Steel Articles
Standard Test Method for Weight {Mass} of Coating on Iron
and Steel Articles with Zinc or Zinc Alloy Coatings
Standard Practice for Operating Salt Spray (Fog) Apparatus
Measurement of Stain Resistance of Anodic Coatings on
Aluminum
Test Method for Measurement of Coating Mass Per Unit
Area on Anodically Coated Aluminum
Method for Measurement of Thickness of Anodic Coatings
on Aluminum and of other Non-conductive Coatings on
Non-magnetic Base Metals with Eddy-Current Instruments
Method for Copper-Accelerated Acetic Acid-Salt Spray
(Fog) Testing (CASS Test)
Standard Specification for Electrodeposited Coatings of
Copper Plus Nickel Plus Chromium and Nickel Plus
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 2 of 17
Standards Council of Canada Accredited Laboratory No. 59
ASTM B487
ASTM B499
ASTM B571
ASTM B578
ASTM B680
ASTM B700
ASTM B767
ASTM C633
ASTM D1654
ASTM D1735
ASTM D2247
ASTM D2794
ASTM D3170
ASTM D3359
ASTM D3363
ASTM D4060
ASTM D4585//D4585M
ASTM D522
ASTM D610
ASTM D7091
ASTM D714
ASTM D870
ASTM D968
Chromium (Dubpernell Test)
Only for: Appendix X4
Test Method for Measurement of Metal and Oxide Coating
Thickness by Microscopical Examination of a Cross Section
Test Method for Measurement of Coating Thickness by the
Magnetic Method; Non-magnetic Coatings on Magnetic
Basis Metals
Practice for Qualitative Adhesion Testing of Metallic
Coatings
Except for: Sections 6, 11, 12
Microhardness of Electroplated Coatings
Seal Quality of Anodic Coatings on Aluminum by Acid
Dissolution
Electrodeposited Coatings of Silver for Engineering Use
Only for: Embrittlement Relief Test, Para. 8.4
Guide for Determining Mass Per Unit Area of
Electrodeposited and Related Coatings by Gravimetric and
Other Chemical Analysis Procedures
Adhesion or Cohesion Strength of Thermal Spray Coatings
Test Method for Evaluation of Painted or Coated Specimens
Subjected to Corrosive Environments
Practice for Testing Water Resistance of Coatings Using
Water Fog Apparatus
Practice for Testing Water Resistance of Coatings in 100%
Relative Humidity
Test Method for Resistance of Organic Coatings to the
Effects of Rapid Deformation (Impact)
Test Method for Chip Resistance of Coatings
Test Methods for Measuring Adhesion by Tape Test
Test Method for Film Hardness by Pencil Test
Test Method for Abrasion Resistance of Organic Coatings
by the Taber Abraser
Standard Practice for Testing Water Resistance of Coatings
Using Controlled Condensation
Mandrel Bend Test of Attached Organic Coatings
Only for: Method B - Cylindrical Mandrel Test
Standard Practice for Evaluating Degree of Rusting on
Painted Steel Surfaces
Nondestructive Measurement of Dry Film Thickness of
Nonmagnetic Coatings Applied to Ferrous Metals and
Nonmagnetic, Nonconductive Coatings Applied to
Non-Ferrous Metals
Test Method for Evaluating Degree of Blistering of Paints
Testing Water Resistance of Coatings Using Water
Immersion
Abrasion Resistance of Organic Coatings By Falling
Abrasive
Only for: Method A - Falling Sand
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 3 of 17
Standards Council of Canada Accredited Laboratory No. 59
ASTM E376
ASTM F519
ASTM G154
ASTM G155
FED-STD-141
FLTM AQ 101-01
FLTM BI 106-01
FLTM BI 108-01
FLTM BN 108-02
FLTM BQ 007-02
FLTM BQ 104-02
FLTM BQ 105-01
FMVSS 209
GM 9500P
GM 9501P
GM 9503P
GM 9505P
GM 9509P
GMW 14124
GMW 14458
GMW 14700
GMW 14729
GMW 14829
GMW 14864
GMW 15282
GMW 15288
GMW 3286
ISO 10289
ISO 1463
Measuring Coating Thickness by Magnetic Field or Eddy
Current (Electromagnetic) Test Methods
Standard Test Method of Mechanical Hydrogen
Embrittlement Evaluation of Plating / Coating Processes
and Service Environments
Practice for Operating Fluorescent Ultraviolet (UV) Lamp
Apparatus for Exposure of Nonmetallic Materials
Practice for Operating Xenon Arc Light Apparatus for
Exposure of Non-Metallic Materials
Abrasion Resistance (Taber Abraser)
Only for: Method 6192
Determination of Phosphate Coating Weights - Chromic
Acid Method
Paint Adhesion Test
Impact Test for Painted Panels
Resistance to Abrasion-Taber Abraser
Acid Dissolution Test Decorative Aluminum Parts
Humidity Resistance Testing
Copper-Accelerated Acetic Acid Salt Spray Testing (CASS
Test)
Seat Belt Assemblies
Only for: Hardware; Corrosion Resistance, Sec. S5.2(a)
Gasoline Puddle Test
Gasoline Dip Test
Evaluating Brittleness of Painted Plastics and Sealants by
Means of a Mandrel
Automotive Environmental Cycles
Solvent Rub Method for Determining Cure of Painted Metal
or Plastic Substrates
Automotive Environmental Cycles
Except for: Cycle T
Copper-Accelerated Acetic Acid Salt Spray (CASS) Test
Stone Impact Resistance of Coatings
Only for: Method B and C
Procedures for High Humidity Test, Option A: Water Fog,
Option B: Wet Bottom
Tape Adhesion Test for Paint Finishes
Procedure for Determining the Staining of Trim Components
Due to Sulfur Dioxide, SO2, and Hydrogen Sulfide, H2S
Corrosion/Undercutting Scribe Creepback
Scab Corrosion Creepback of Paint Systems on Metal
Substrates
Procedure for Neutral Salt Spray Test
Methods for corrosion testing of metallic and other inorganic
coatings on metallic substrates - Rating of test specimens
and manufactured articles subjected to corrosion tests.
Metallic and Oxide Coatings - Measurement of Coating
Thickness Microscopic Method
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 4 of 17
Standards Council of Canada Accredited Laboratory No. 59
ISO 2106
ISO 2808
ISO 3210
ISO 9227
SAE J1767
SAE J2334
SAE J2412
SAE J2527
SAE J400
Anodizing of Aluminum and its Alloys-Determination of
Mass per Unit Area (Surface Density) of Anodic Oxide
Coatings-Gravimetric Method
Paints and Varnishes - Determination of Film Thickness
Only for: Methods 6A, 6B, 7C, 7D
Anodizing of Aluminum and its Alloys-Assessment of
Quality of Sealed Anodic Oxide Coatings by Measurement
of the Loss of Mass after Immersion in Phosphoric-Chromic
Acid Solution
Corrosion Tests in Artificial Atmospheres-Salt Spray Tests
Instrumental Colour Difference Measurements for
Colorfastness of Automotive Interior Trim Materials
Cosmetic Corrosion Lab Test
Accelerated Exposure of Automotive Interior Trim
Components Using a Controlled Irradiance Xenon-Arc
Apparatus
Performance Based Standards for Accelerated Exposure of
Automotive Exterior Materials Using a Controlled Irradiance
Xenon-Arc Apparatus
Test for Chip Resistance of Surface Coatings
Colour and Appearance
see also
Fabrics
Applied Coatings Performance
ASTM D2244
ASTM D523
ASTM E1164
ASTM E1347
CLP-463PB-31-01
FLTM BI 110-01
FLTM BI 113-07
GM 9741P
SAE J1545
Standard Practice for Calculation of Colour Tolerances and
Colour Differences from Instrumentally Measured Colour
Co-ordinates
Test Method for Specular Gloss
Standard Practice for Obtaining Spectrophotometric Data for
Object-Color Evaluation
Colour and Colour-Difference Measurement by Tristimulus
(Filter) Colorimetry
Resistance of Paint Films to Various Fluids
Except for: Method I
Measurement of the Gloss of Paint Panels
Resistance to Synthetic Perspiration Staining
Instrumented Colour Measurement
Instrumental Colour Difference Measurement for Exterior
Finishes, Textiles and Coloured Trim
Paints and Protective Coatings
ASTM D2369
Test Methods for Volatile Content of Coatings
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 5 of 17
Standards Council of Canada Accredited Laboratory No. 59
Plastics; Resins and Rubbers:
Plastics
see also
Fabrics
Resins and Rubbers
Colour and Appearance
Construction Materials
Applied Coatings Performance
ASTM D1003
ASTM D1004
ASTM D1238
ASTM D1525
ASTM D1693
ASTM D1790
Standard Test Method for Haze and Luminous
Transmittance of Transparent Plastics
Only for: Appendix X2
Standard Test Methods for Tear Resistance (Graves Tear) of
Plastic Film and Sheeting
Standard Test Method for Melt Flow Rates of
Thermoplastics by Extrusion Plastometer
Only for: Method A
Test Method for Vicat Softening Temperature of Plastics
Standard Test Method for Environmental Stress Cracking of
Ethylene Plastics
Test Method for Brittleness Temperature of Plastic Film by
Impact
ASTM D1822
Test Method for Tensile-Impact Energy to Break Plastic and
Electrical Insulating Materials
ASTM D2457
Test Method for Specular Gloss of Plastic Film and Solid
Plastics
Standard Test Methods for Determining the Izod Pendulum
Impact Resistance of Plastics
Only for: Methods A, C and E
Xenon-Arc Exposure of Plastics Intended for Outdoor
Applications
Standard Specification for Strapping, Non-metallic (and
Joining Methods)
Test Methods for Impact Resistance of Rigid
Polyvinylchloride (PVC) Building Products
Standard Practice for Fluorescent Ultraviolet (UV) Lamp
Apparatus Exposure of Plastics
Standard Practice for Xenon-Arc Exposure of Plastics
Intended for Indoor Applications
ASTM D256
ASTM D2565
ASTM D3950
ASTM D4226
ASTM D4329
ASTM D4459
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 6 of 17
Standards Council of Canada Accredited Laboratory No. 59
ASTM D4812
ASTM D5420
ASTM D570
ASTM D6109
ASTM D6110
ASTM D6272
ASTM D6341
ASTM D635
ASTM D638
ASTM D648
ASTM D6662
ASTM D695
ASTM D696
ASTM D7032
ASTM D732
ASTM D746
ASTM D785
ASTM D790
ASTM D792
ASTM D882
ASTM F2231
CLP-463LB-12-01
Un-notched Cantilever Beam Impact Resistance of Plastics
Test Method for Impact Resistance of Flat Rigid Plastic
Specimen by Means of a Striker Impacted by a Falling
Weight (Gardner Impact)
Test Method for Water Absorption of Plastics
Test Methods for Flexural Properties of Unreinforced and
Reinforced Plastic Lumber
Test method for determining the Charpy Impact Resistance
of Notched Specimens of Plastics
Standard Test Method for Flexural Properties of
Un-reinforced and Reinforced Plastics and Electrical
Insulating Materials by Four-Point Bending
Test Method for Determination of the Linear Coefficient of
Thermal Expansion of Plastic Lumber and Plastic Lumber
Shapes Between -30 and 140°F (-34.4 and 60°C)
Rate of Burning and/or Extent and Time of Burning of
Plastics in a Horizontal Position
Test Method for Tensile Properties of Plastics
Test Method for Deflection Temperature of Plastics Under
Flexural Load
Polyolefin-Based Plastic Lumber Decking Boards
Except for: Sec. 6.3.1 - Test Procedure for Surface
Appearance
Changes (Xenon Exposure)
Sec. 6.3.3 - Hygrothermal Cycling
Sec. 6.4 - Fire Properties
Test Method for Compressive Properties of Rigid Plastics
Standard Test Method for Coefficient of Linear Thermal
Expansion of Plastics Between -30ºC and 30°Cwith
aVitreous Silica Dilatometer
Establishing Performance Ratings for Wood-Plastic
Composite Deck Boards and Guardrail Systems (Guards or
Handrails)
Except for: Biodetermination Tests and Fire Performance
Tests
Shear Strength of Plastics by Punch Tool
Test Method for Brittleness Temperature of Plastics and
Elastomers by Impact
Test Method for Rockwell Hardness of Plastics and
Electrical Insulating Materials
Test Methods for Flexural Properties of Un-reinforced and
Reinforced Plastics and Electrical Insulating Materials
Standard Test Methods for Density and Specific Gravity
(Relative Density) of Plastics by Displacement
Test Methods for Tensile Properties of Thin Plastic Sheeting
Charpy Impact Test on Thin Specimens of Polyethylene
Used in Pressurized Pipes
Resistance to Humidity Hot and Cold Cycling of Trim
Materials
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 7 of 17
Standards Council of Canada Accredited Laboratory No. 59
FLTM BN 024-02
FLTM BO 115-01
FMVSS 302
GM 9126P
GM 9128P
GM 9131P
GM 9133P
GM 9141P
GM 9143P
GM 9150P
GM 9160P
GM 9200P
GM 9302P
GM 9773P
GMW 14093
GMW 14334
GMW 3205
GMW 3232
GMW 3259
ICC-ES AC174
ISO 1133-1
ISO 1183-1
ISO 178
ISO 179-1
ISO 180
ISO 291
ISO 306
ISO 3795
Flammability Test for Automotive Interior Materials
Plastics - Resistance to Artificial Weathering
Flammability of Interior Polymeric Materials, Horizontal
Test Method
Test for Cleanability of Textiles and Plastics
Mildew Growth
Colour Change Due to Temperature and Humidity
Resistance to Water Spotting, Finish Disturbance, Salt
Staining, and Discolouration
Compatibility of Plastic Rolled Goods and Leather to White
Vinyl and to White Leather
Crazing of Vinyl Trim Materials
Resistance to Marring or Scuffing
Top Coat Adhesion of Vinyls
Accelerated Aging
Except for: Section 4.2 Steaming
Test for Stress Mark Susceptibility of Plastic Materials
Cold Slam Test
Determination of Impact Resistance of Plastic Components
Except for: Method B
Chemical Resistance to Fluids
Test Method for Determining the Resistance to Odour
Propagation of Interior Materials
Test Method for Determining the Flammability of Interior
Trim Materials
Mildew Resistance
ICC Evaluation Services, Inc. - Acceptance Criteria for Deck
Board Span Ratings and Guardrail Systems (Guards and
Handrails)
Except for: Sec. 3.9 - Termite and Decay, Sec. 3.10 Flame
Spread and Sec.3.11 Duration of Load
Plastics-Determination of the Melt Mass-Flow Rate (MFR)
and the Melt Volume-Flow Rate (MVR) of Thermoplastics
Part 1: Standard Method
Only for: Procedure A
Plastics-Methods for Determining the Density of
Non-Cellular Plastics
Only for: Method A
Plastics-Determination of Flexural Properties
Plastics-Determination of Charpy Impact Strength
Part 1: Non-instrumented Impact Test
Plastics-Determination of Izod Impact Strength
Plastics-Standard Atmospheres for Conditioning and Testing
Plastics-Thermoplastic Materials-Determination of Vicat
Softening Temperature (VST)
Road Vehicles and Tractors and Machinery for Agriculture
and Forestry-Determination of Burning Behavior of Interior
Materials
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 8 of 17
Standards Council of Canada Accredited Laboratory No. 59
ISO 527-1
ISO 527-2
ISO 604
ISO 62
ISO 75-1
ISO 75-2
ISO 974
SAE J369
Plastics-Determination of Tensile Properties
Part 1: General Principles
Plastics-Determination of Tensiles Properties
Part 2: Test Conditions for Moulding and Extrusion
Plastics
Plastics Determination of Compressive Properties
Plastics-Determination of Water Absorption
Plastics-Determination of Temperature of Deflection Under
Load
Part 1: General Test Methods
Plastics-Determination of Temperature of Deflection Under
Load
Part 2: Plastics and Ebonite
Plastics-Determination of the Brittleness Temperature by
Impact
Flammability of Polymeric Interior Materials-Horizontal
Test Method
Resins and Rubbers
see also
Applied Coatings Performance
Plastics
ASTM D1056
ASTM D1229
ASTM D1414
ASTM D2137
ASTM D2240
ASTM D3574
ASTM D395
ASTM D412
ASTM D413
ASTM D429
ASTM D573
Specification for Flexible Cellular Materials -Sponge or
Expanded Rubber
Test Method for Rubber Property - Compression Set at Low
Temperature
Standard Test Methods for Rubber O-Rings
Except for: Tension Set Test, Low-Temperature Test, O-ring
Mold Shrinkage Test
Standard Test Methods for Rubber Property-Brittleness
Point of Flexible Polymers and Coated Fabrics
Test Method for Rubber Property - Durometer Hardness
Test Methods for Flexible Cellular Materials - Slab, Bonded,
and Molded Urethane Foams
Only for: Tests A, B1, B2, C, D, E, F, K
Test Methods for Rubber Property - Compression Set
Standard Test Methods for Vulcanized Rubber and
Thermoplastic Elastomers - Tension
Test Methods for Rubber Property-Adhesion to Flexible
Substrate (Machine Method)
Test Methods for Rubber Property-Adhesion to Rigid
Substrates
Only for: Method A
Test Method for Rubber Deterioration in an Air Oven
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 9 of 17
Standards Council of Canada Accredited Laboratory No. 59
ASTM D575
ASTM D624
ASTM D925
ISO 815-1
ISO 815-2
Rubber Properties in Compression
Test Method for Tear Strength of Conventional Vulcanized
Rubber and Thermoplastic Elastomer
Standard Test Methods for Rubber Property - Staining of
Surfaces (Contact, Migration and Diffusion)
Only for: Method A
Rubber, Vulcanized or Thermoplastic-Determination of
Compression Set-Part 1:At Ambient or Elevated
Temperatures
Rubber, Vulcanized or Thermoplastic-Determination of
Compression Set -Part 2: At Low Temperatures
METALLIC ORES AND PRODUCTS
Articles of Metal:
All Forms, Articles of Metal
AASHTO T244
AMS 2315
AMS 2485
ASTM A247
ASTM A255
ASTM A262
ASTM A370
ASTM A561
ASTM A604/A604M
ASTM A799/A799M
ASTM A800/A800M
ASTM A923
ASTM B557
ASTM D3953
ASTM E10
ASTM E1019
Standard Method of Test for Mechanical Testing of Steel
Products
Determination of Delta Ferrite Content
Coating, Black Oxide
Only for: Surface and Intergranular Attack, Para. 3.3.4
Test Method for Evaluating the Microstructure of Graphite
in Iron Castings
Standard Test Methods for Determining Hardenability of
Steel
Practices for Detecting Susceptibility to Intergranular Attack
in Austenitic Stainless Steels
Test Methods and Definitions for Mechanical Testing of
Steel Products
Macroetch Testing of Tool Steel Bars
Macroetch Testing of Consumable Electrode Remelted Steel
Bars and Billets
Standard Practice for Steel Castings, Stainless, and
Instrument Calibration for Estimating Ferrite Content
Standard Practice for Steel Casting, Austenitic Alloy,
Estimating Ferrite Content Thereof
Detecting Detrimental Intermetallic Phase in Duplex
Austenitic/Ferritic Stainless Steels
Method of Tension Testing Wrought and Cast Aluminum
and Magnesium Alloy Products
Standard Specification for Strapping, Flat Steel and Seals
Test Method for Brinell Hardness of Metallic Materials
Test Methods for Determination of Carbon, Sulphur,
Nitrogen and Oxygen in Steel, Iron, Nickel and Cobalt
Alloys
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 10 of 17
Standards Council of Canada Accredited Laboratory No. 59
ASTM E1077
ASTM E1097 CMTL Modified
ASTM E111
ASTM E112
ASTM E1180
ASTM E1181
ASTM E1245
ASTM E1268
ASTM E1382
ASTM E139
ASTM E140
ASTM E1409
ASTM E1447
ASTM E1447 Applied to Steel
ASTM E1479
ASTM E18
ASTM E21
ASTM E23
ASTM E290
ASTM E292
ASTM E3
ASTM E340
ASTM E345
Test Methods for Estimating the Depth of Carburization of
Steel Specimens
Standard Guide for Determination of Various Elements
by Direct Current Plasma Emission Spectrometry Analysis
(Modified for ICP Argon Optical Emission Spectrometry)
Test Method for Young s Modulus, Tangent Modulus and
Chord Modulus
Test Methods for Determining the Average Grain Size
Standard Practice for Preparing Sulfur Prints for
Macrostructural Evaluation
Test Methods for Characterizing Duplex Grain Sizes
Standard Practice for Determining the Inclusion or Second
Phase Constituent Content of Metals by Automatic Image
Analysis
Standard Practice for Assessing the Degree of Banding or
Orientation of Microstructures Analysis
Test Methods for Determining Average Grain Size Using
Semiautomatic and Automatic Image Analysis
Standard Test Methods for Conducting Creep,
Creep-Rupture, and Stress Rupture Tests of Metallic
Materials (only for Stress Rupture)
Only for: Stress Rupture
Standard Hardness Conversion Tables for Metals
Relationship Among Brinell Hardness, Vickers Hardness,
Rockwell Hardness, Superficial Hardness, Knoop Hardness,
Scleroscope Hardness and Leeb Hardness
Determination of Oxygen and Nitrogen in Titanium and
Titanium Alloys by Inert Gas Fusion
Determination of Hydrogen in Titanium and Titanium
Alloys by the Inert Gas Fusion Thermal
Conductivity/Infrared Detection Method
Determination of Hydrogen in Titanium and Titanium
Alloys by the Inert Gas Fusion Thermal
Conductivity/Infrared Detection Method
Practice for Describing and Specifying Inductively-Coupled
Plasma Optical Emission Spectrometers
Standard Test Methods for Rockwell Hardness of Metallic
Materials
Elevated Temperature Tension Tests of Metallic Materials
Test Methods for Notched Bar Impact Testing of Metallic
Materials
Standard Test Method for Bend Testing of Material for
Ductility
Standard Test Methods for Conducting Time-for-Rupture
Notch Tension Tests of Materials
Standard Guide for Preparation of Metallographic
Specimens
Method for Macroetching Metals and Alloys
Test Methods of Tension Testing of Metallic Foil
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 11 of 17
Standards Council of Canada Accredited Laboratory No. 59
ASTM E381
ASTM E384
ASTM E407
ASTM E45
ASTM E517
ASTM E562
ASTM E646
ASTM E768
ASTM E8/E8M
ASTM E883
ASTM E9
ASTM E930
ASTM F2328
ASTM G28
ASTM G34
ASTM G46
ASTM G48
GMW 3335
ISO 10113
ISO 10275
ISO 148-1
ISO 3274
ISO 4287
Standard Method of Macroetch Testing Steel Bars, Billets,
Blooms and Forgings
Standard Test Method for Knoop and Vickers Hardness of
Materials
Only for: 50g to 50kg load
Standard Practice for Microetching Metals and Alloys
Standard Test Methods for Determining the Inclusion
Content of Steel
Except for: Magnetic Particle Method
Test Method for Plastic Strain Ratio r for Sheet Metal
Standard Test Method for Determining Volume Fraction by
Systematic Manual Point Count
Test Method for Tensile Strain Hardening Exponents
(n-Values) of Metallic Sheet Materials
Standard Guide for Preparing and Evaluating Specimens for
Automatic Inclusion Assessment of Steel
Standard Test Methods for Tension Testing of Metallic
Materials
Standard Guide for Reflected-Light Photomicrography
Standard Test Methods of Compression Testing of Metallic
Materials at Room Temperature
Test Methods for Estimating the Largest Grain Observed in a
Metallographic Section (ALA Grain Size)
Standard Test Method for Determining Decarburization and
Carburization in Hardened and Tempered Threaded Steel
Bolts, Screws and Studs
Test Methods of Detecting Susceptibility to Intergranular
Corrosion in Wrought, Nickel Rich, Chromium-Bearing
Alloys
Exfoliation Corrosion Susceptibility in 2XXX and 7XXX
Series Aluminum Alloys (EXCO Test)
Standard Guide for Examination and Evaluation of Pitting
Corrosion
Except for: Nondestructive Inspection
Pitting and Crevice Corrosion Resistance of Stainless Steels
and Related Alloys by Use of Ferric Chloride Solution
Metallic Sheet, Mechanical Properties Testing
Metallic Materials - Sheet and Strip - Determination of
Plastic Strain Ratio
Metallic Materials - Sheet and Strip - Determination of
Tensile Strain Hardening Exponent
Charpy Pendulum Impact Test - Test Method
Geometrical Product Specifications (GPS) - Surface Texture:
Profile Method - Nominal Characteristics of Contact (Stylus)
Instruments
Geometrical Product Specifications (GPS) - Surface Texture:
Profile Method - Terms, Definitions and Surface Texture
Parameters
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 12 of 17
Standards Council of Canada Accredited Laboratory No. 59
ISO 643
ISO 6507-1
ISO 6508-1
ISO 6892-1
ISO 6892-2
SAE J406
SAE J417
SAE J419
SAE J422
SAE J423
SAE J911
Steels-Micrographic Determination of the Ferritic or
Austenitic Grain Size
Metallic Materials - Vickers Hardness Test
Metallic Materials - Rockwell Hardness Test
Metallic Materials-Tensile Testing, Part 1 Method of Test
at Room Temperature
Metallic Materials-Tensile Testing, Part 2 Method of Test
at Elevated Temperature
Methods of Determining Hardenability of Steels
Hardness Tests & Hardness Number Conversion (Vickers,
Brinell, & Rockwell Tests)
Methods of Measuring Decarburization
Microscopic Determination of Inclusions in Steel
Methods of Measuring Case Depth
Surface Texture Measurement of Cold Rolled Sheet Steel
Welded
ASME Boiler & Pressure Vessel
Code Section II, Part C
ASME Boiler & Pressure Vessel
Code Section IX
ASTM E190
AWS B4.0
CAN/CSA W48
CSA-Z662
GM 4491M
GMW 14058
ISO 5817
Material Specifications-Welding Rods, Electrodes and Filler
Metals
Welding and Brazing Qualifications
Except for: Liquid Penetrant Testing
Test Method for Guided Bend Test for Ductility of Welds
Standard Methods for Mechanical Testing of Welds
Filler Metals and Allied Materials for Metal Arc Welding
Oil and Gas Pipeline Systems
Arc Spot, Plug and Slot Welding Specification
Weld Acceptance Criteria and Repair Procedures for Arc
Welds and Arc Brazes - Steel
Welding Fusion-Welded Joints in Steel, Nickel, Titanium
and Their Alloys (Beam Welding Excluded) Quality
Levels for Imperfections
Semi-Fabricated Products: (Extrusion, rolled sections)
CAN/CSA-G40.20
CAN/CSA-G40.21
General Requirements for Rolled or Welded Structural
Quality Steel
Except for: L shape full section tensile testing
Non - destructive testing
Structural Quality Steels
Tools, Fasteners and Hardware:
see also
All Forms, Articles of Metal
ASTM A489
Specification for Carbon Steel Lifting Eyes
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 13 of 17
Standards Council of Canada Accredited Laboratory No. 59
ASTM A574
ASTM D1761
ASTM D6117
ASTM E894
ASTM E935
ASTM F541
ASTM F606
ASTM F606M
ASTM F788
ASTM F812
ASTM F835
ISO 898 -1
NASM 1312
SAE J1199
SAE J122
SAE J238
SAE J429
SAE J430
SAE J773
SAE J995
Specification for Alloy Steel Socket-Head Cap Screws
Standard Test Methods for Mechanical Fasteners in Wood
Only for:
Withdrawal Test & Lateral Resistance Test
Standard Test Methods for Mechanical Fasteners in Plastic
Lumber and Shapes
Only for: Withdrawal Test & Lateral Resistance Test
Standard Test Method for Anchorage of Permanent Metal
Railing Systems and Rails for Buildings
Standard Test Methods for Performance of Permanent Metal
Railing Systems and Rails for Buildings
Specification for Alloy Steel Eyebolts
Standard Test Methods for Determining the Mechanical
Properties of Externally and Internally Threaded Fasteners,
Washers, Direct Tension Indicators and Rivets
Except for: Section 5.6 Test Method for Measuring
Compression Load (Direct Tension Indicators)
Section 7. Test for Embrittlement of Metallic Coated
Externally Threaded Fasteners
Standard Test Methods for Determining Mechanical
Properties of Externally and Internally Threaded Fasteners,
Washers and Rivets (Metric)
Except for: Section 7. Test for Embrittlement of Metallic
Coated Externally Threaded Fasteners
Annex A1. Test Method for Measuring Compression Load
on Direct Tension Indicators
Standard Specification for Surface Discontinuities of Bolts,
Screws, and Studs, Inch and Metric Series
Standard Specification for Surface Discontinuities of Nuts,
Inch and Metric Series
Specification for Alloy Steel Socket Button and Flat
Countersunk Head Cap Screws
Mechanical Properties of Fasteners Made of Carbon Steel
and Alloy Steel
Part 1: Bolts, Screws and Studs with Specified Property
Classes-Coarse Thread and Fine Pitch Thread
Fastener Test methods
Only for: 1, 6, 8, 10, 12
Mechanical and Material Requirements for Metric
Externally Threaded Steel Fasteners
Surface Discontinuities on Nuts
Nut and Conical Spring Washer Assemblies
Mechanical and Material Requirements for Externally
Threaded Fasteners
Mechanical and Chemical Requirements for Non-Threaded
Fasteners
Conical Spring Washers
Mechanical and Material Requirements for Steel Nuts
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 14 of 17
Standards Council of Canada Accredited Laboratory No. 59
(Fasteners and Fastener Materials
see also:
Applied Coatings Performance
All Forms, Articles of Metal
Tools, Fasteners, and Hardware)
TEXTILES AND FIBROUS MATERIALS
Other
(Leather
see also: Plastics)
CLP 463KC-21-01
Perspiration Resistance
Textile Mill Products: (Including synthetic and natural fibres)
Fabrics
See also:
Applied Coatings Performance Colour and Appearance
Plastics
AATCC EP1
AATCC EP2
AATCC EP8
AATCC TM8
ASTM D3884
ASTM D5034
ASTM D5035
ASTM D5587
CLP-463KB-02-01
CLP-463KB-21-01
CLP-463KC-13-01
FLTM AN 101-01
Grey Scale for Colour Change
Grey Scale for Staining
9 Step Chromatic Transference Scale
Colourfastness to Crocking: AATCC Crockmeter Method
Standard Test Method for Abrasion Resistance of Textile
Fabrics (Rotary Platform, Double Head Method)
Standard Test Method for Breaking Strength and Elongation
of Textile Fabrics (Grab Test)
Standard Test Method for Breaking Force and Elongation of
Textile Fabrics (Strip Method)
Tearing Strength of Fabrics by Trapezoid Procedure
Breaking Strength and Elongation Testing of Soft Trim
Materials
Wear Resistance of Trim Materials - Taber Method
Flammability of Automotive Interior Trim Materials Fabrics
Resistance of Textiles to Bleeding, Perspiration and Water
Spotting
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 15 of 17
Standards Council of Canada Accredited Laboratory No. 59
FLTM BN 107-01
GM 9130P
Crocking Test
Test for Resistance to Odour of Textiles
GMW 4217
ISO 105-A02
Dimensional Stability
Textiles-Test for Colour Fastness (Grey Scale for Assessing
Change in Colour)
Hot Odour Test for Insulation Materials
Method of Testing Resistance to Crocking of Organic Trim
Materials
Test Method for Wicking of Automotive Fabrics and Fibrous
Materials
Only for: Method C
SAE J1351
SAE J861
SAE J913
WOOD PRODUCTS
(AND PLASTIC LUMBER)
Construction Materials: (Including for Furniture)
(and Plastic Lumber Decking and Guardrails)
ASTM D1037
ASTM D143
ASTM D2394
Standard Test Methods for Evaluating Properties of Wood
Base Fiber and Particle Panel Materials
Only for: Hardness Test; Water Absorption and Thickness
Swelling Test
Standard Test Methods for Small Clear Specimens of
Timber
Only for: Hardness
Standard Methods for Simulated Service Testing of Wood
and Wood-Base Finish Flooring
Only for: Coefficient of Friction
Notes:
CAN-P-4E (ISO/IEC 17025:2005): General Requirements for the Competence of Testing and Calibration
Laboratories (ISO/IEC 17025: 2005)
Chantal Guay, ing., P. Eng.
Vice President, Accreditation
Services
Date: 2015-05-12
Number of Scope Listings: 312
SCC 1003-15/80
Partner File #0
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 16 of 17
Standards Council of Canada Accredited Laboratory No. 59
Partner: None
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 17 of 17